top of page

The Ultimate Hygiene Solution

✔️ Advanced air and surface sterilising technology eradicates viruses, bacteria and pollen.

✔️Independently tested and proven to destroy Covid-19 and other pathogens in the air. 

✔️UVC light, HEPA 14 filters and Ozone technology.

✔️Air quality monitoring software measures carbon dioxide, temperature, humidity and air exchange levels.



Enhanced Levels of Safety and Cleanliness 

The React Air range uses powerful HEPA and UVC filtration to remove viruses, bacteria and odours from a room. Businesses across the UK have been utilising these systems throughout the Covid-19 crisis, to provide enhanced levels of safety and cleanliness for their staff and visitors. 

Advanced Monitoring Technology

Utilising highly accurate onboard sensors, the units monitor air quality, carbon dioxide, temperature, humidity and air exchange levels.  This measurement technology is available as standard on our React-Air standalone units, such as the Impact, Evo and Expanse, or can be integrated into our React-Air Induct and HVAC UVC array installations. Users are able to view detailed air quality information on the unit touch screen, or via control screens mounted throughout their building.

Air Quality Monitor
Request a Quote

Thank you, an expert will be in touch

React-Air Impact

Commercial, standalone air purifier and surface steriliser.

Connect multiple Impacts on WIFI or 4g.


Commercial, freestanding air purifier and surface steriliser.

Connect multiple Expanses on WIFI or 4g.

IMG_0102 copy.png

Above ceiling air purifier.

Installs into your existing ceiling infrastructure.


Professional, portable air purifier and surface steriliser for commercial environments.

React-Air Evo01.png

Commercial, standalone air purifier and surface steriliser.

Connect multiple Evo units on WIFI or 4g.

React-Air Delta Air Exchanger

Air purifier and fresh air exchanger. Manage Carbon Dioxide levels within your building

RG Background.jpg


Our products have been tested and proven effective against Covid-19

Our React-Air Technology has been tested by CDC approved laboratories in the United States for their effectiveness against removing and neutralising airborne (aerosolised) Covid-19 from the air.  In multiple trials, our 'Destroyer' technology proved a 89% neutralisation rate of Covid-19 under test conditions, within 15 minutes of operation.

Trials were undertaken by introducing airborne (aerosolised) Covid-19 in to a sealed test-environment.  After a number of control tests (without our technology) and full tests (with our technology), airborne Covid-19 was found to be reduced from 27% of average control test degradation to 89% with our React-Air Technology in place, within 15 minutes.

Download the full the test report here


Studies by The University of Boston undertaken in 2020 have shown that Covid-19 is highly susceptible to UVC light.  Japanese scientists have been conducting studies on the effects of ozone in neutralising Covid-19 on surfaces and have shown it to be highly effective with a 90% sterilisation rate.  This information, published by shows the results and effective dosages of UV-C light required to inactivate various strains of coronavirus.

“Table 1 above summarises the results of studies that have been performed on Coronaviruses under ultraviolet light exposure, with the specific species indicated in each case. The D90 value indicates the ultraviolet dose for 90% inactivation.

Although there is a wide range of variation in the D90 values, this is typical of laboratory studies on ultraviolet susceptibility. The range of D90 values for coronaviruses is 7-241 J/m2 the mean of which is 67 J/m2, should adequately represent the ultraviolet susceptibility of the SARS-CoV-2 (COVID-19) virus.”

By using this exposure data, and comparing the UV light irradiance measurements from our products, we calculate the exposure times required to deactivate coronaviruses.  This is however, a calculation and currently is not backed up by laboratory tests.

bottom of page