0203 885 2299
React-Air Systems
Air Sterilisation for Dental Practices
Give your staff and visitors clean, sterilised air for added peace of mind
Our unique React-Air products combines powerful pathogen-neutralising UV-C germicidal technology with measurement data and tools that ensures the air your breathe is protected from viruses.
Our React-Air units use Pure Germicidal Light and include between 2 and four High-Intensity Pure Fused Quartz UVC Germicidal Lamps which allow air to flow through them, destroying 99.9% of biological contaminants, and will prevent them from ever growing again and spreading.
Real-Time Information... constant contamination neutralisation you can measure
Price Request
The React-Air Induct is the only UV germicidal in-line unit that simultaneously monitors lamp brightness, air-flow and air quality and then feeds this information directly back to a base station, so the performance of the system can be monitored from either our ‘React-Air’ mobile app or our online web-based platform for both individual and multiple sites.
This functionality ensures optimal performance combined with real-time information to keep your buildings safe.
Portable air sanitisation that can be moved from room to room, as required
The React-Air X, is a portable air sanitiser, designed for use in commercial environments. Using a unique UV-C light array, the powerful fans drive the airflow through the decontamination chamber, neutralising bacteria, viruses, pollen and odours, delivering clean and sterile air to a room. Unlike ozone generators, it can be used whilst people remain in the room and generates no harmful gasses and at a fraction of the price of leading portable ozone generators.. When used in conjunction with normal cleaning techniques, it is a highly effective in the fight against bacteria and viruses
Real-Time data on our mobile app and online, for monitoring across multiple sites
The React-Air monitoring system uses state-of-the-art measurement contained within the Induct device. Measurements are taken every 10 seconds to ascertain:
Lamp Function and Brightness
Over time, all UV Germicidal Lamps will lose brightness and the surfaces become contaminated by impurities in the air. Once this reaches a threshold, the in-built UV monitor alerts the user that a service is required.
Air Quality
The integrated air quality monitor measures air impurities down to 0.1um. Every 10 seconds, this information is recorded and sent back to the building’s base unit to show real-time air quality information.
Air Flow and Air Exchange Rates
By constantly monitoring air-flow volume through each one of the Induct units, the React-Air system calculates the number of hourly, daily, and weekly air exchanges in your building.
CALL US NOW: 0203 885 2299
How effective are our React-Air products against coronavirus?
Since coronavirus (covid-19) is a new virus, there have been few specific studies. However, scientists have been studying the susceptibility of Coronaviruses to UV-C light for over 30 years. This information, published by research.net shows the results and effective dosages of UV-C light required to inactivate various strains of coronavirus.
“Table 1 above summarises the results of studies that have been performed on Coronaviruses under ultraviolet light exposure, with the specific species indicated in each case. The D90 value indicates the ultraviolet dose for 90% inactivation.
​
Although there is a wide range of variation in the D90 values, this is typical of laboratory studies on ultraviolet susceptibility. The range of D90 values for coronaviruses is 7-241 J/m2 the mean of which is 67 J/m2, should adequately represent the ultraviolet susceptibility of the SARS-CoV-2 (COVID-19) virus.”
​
By using this exposure data, and comparing the UV light irradiance measurements from our products, we calculate the exposure times required to deactivate coronaviruses.