Advanced Sterilisation for Livestock Farms
Create a clean, sterile environment for your animals, staff and visitors.
Our unique React-Air products combine powerful pathogen-neutralising UV-C germicidal technology with measurement data and tools that ensures your environment is protected from viruses and bacteria.
Our React-Air units use Pure Germicidal Light and include between 2 and four High-Intensity Pure Fused Quartz UVC Germicidal Lamps which allow air to flow through them, destroying 99.9% of biological contaminants, and will prevent them from ever growing again and spreading.
UVC Light - Neutralising Viruses In the Air
UVC light is highly effective at decontamination because it destroys the molecular bonds that hold together the DNA of viruses and bacteria. When used in conjunction with normal cleaning techniques, it is highly effective in the fight against bacteria and viruses.
CALL US: 0203 885 2299
Our products have been tested and proven effective against Covid-19
Our React-Air Technology has been tested by CDC approved laboratories in the United States for their effectiveness against removing and neutralising airborne (aerosolised) Covid-19 from the air. In multiple trials, our 'Destroyer' technology proved a 89% neutralisation rate of Covid-19 under test conditions, within 15 minutes of operation.
Trials were undertaken by introducing airborne (aerosolised) Covid-19 in to a sealed test-environment. After a number of control tests (without our technology) and full tests (with our technology), airborne Covid-19 was found to be reduced from 27% of average control test degradation to 89% with our React-Air Technology in place, within 15 minutes.
Studies by The University of Boston undertaken in 2020 have shown that Covid-19 is highly susceptible to UVC light. Japanese scientists have been conducting studies on the effects of ozone in neutralising Covid-19 on surfaces and have shown it to be highly effective with a 90% sterilisation rate. This information, published by research.net shows the results and effective dosages of UV-C light required to inactivate various strains of coronavirus.
“Table 1 above summarises the results of studies that have been performed on Coronaviruses under ultraviolet light exposure, with the specific species indicated in each case. The D90 value indicates the ultraviolet dose for 90% inactivation.
Although there is a wide range of variation in the D90 values, this is typical of laboratory studies on ultraviolet susceptibility. The range of D90 values for coronaviruses is 7-241 J/m2 the mean of which is 67 J/m2, should adequately represent the ultraviolet susceptibility of the SARS-CoV-2 (COVID-19) virus.”
By using this exposure data, and comparing the UV light irradiance measurements from our products, we calculate the exposure times required to deactivate coronaviruses. This is however, a calculation and currently is not backed up by laboratory tests.