Portable Air and Surface Steriliser
Daily disinfection of air, surfaces and fabrics
Using UVC technology, powerful fans neutralise bacteria, viruses, pollen and odours, delivering clean, sterile air to your room.
Independently tested by FDA licenced laboratories in the United States
Costs as little as £7* per day
No chemicals or manpower required.
The Most Effective Anti-Viral Cleaning
Solution for Commercial Environments
The React-Air Impact is a portable air and surface steriliser designed for use in commercial environments. Using a UVC technology, the powerful fans drive the airflow through the decontamination chamber, neutralising bacteria, viruses, pollen and odours, delivering clean and sterile air to a room. The Impact is also a powerful ozone generator, which can be set to activate when a room is unoccupied, filling the environment with ozone gas. When the ozone comes in to contact with items and surfaces, it eradicates viruses and bacteria, sterilising everything it touches.
The Power of Ozone - Advanced Surface Sterilisation
Viruses and bacteria can be neutralised with alcohol and hydrogen peroxide, however, these substances cannot be used on some surfaces, and will only be effective on items and surfaces which can be reached. Ozone gas will penetrate hard to reach areas, fabrics and rough or uneven surfaces. This makes ozone gas a valuable addition to standard cleaning and disinfection practices.
The Impact contains 2 high powered ozone discharge plates which operate as a separate function from the air cleaning UVC technology.
UVC Light - Neutralising Viruses In the Air
UVC light is highly effective at decontamination because it destroys the molecular bonds that hold together the DNA of viruses and bacteria. UVC light has been regularly used to decontaminate surgical tools and hospital rooms.
The Impact draws air into its extraction vents which are specifically located at shoulder height, so as to capture as many virus particles as possible. The air then passes through a medical-grade HEPA 13 filter, trapping any larger contaminants, and finally through a
high intensity UVC chamber, capable of delivering a dose of over 240J/M3 - enough to neutralise even the most resilient coronaviruses studied.
The high power, variable fan can circulate up to 1504 metres cubed of air per hour - enough to give 9 air cycles per hour in an average 50 person office space.
Book A Call Back
Please complete the form below to
book a call with one of our experts
Multiple Impacts are connected via WiFi or 4g, to allow you to manage the settings on all devices through a single unit or through our desktop and mobile app. Real-time and historic data on airflow, air quality, and ozone sterilisation can also be viewed on our desktop and mobile applications. Ozone Release, UVC Times can be set using the UVC touchscreen. The Impact also contains a powerful sensor array that monitors Air Exchanges, Air Quality and UVC Dose. This information is displayed on the screen to give users extra peace of mind.
Monitor Air Quality in Real Time
What our customers are saying:
Inbuilt Safety Features for Your Peace of Mind
Ozone can be harmful if inhaled so the Impact can be set, by an authorised user with a password, to be released when the room is empty. This can be set on a timer function and an audible and visual warning is given before ozone is dispersed, with an emergency shut-off feature, should anyone still be in the room. Once the ozone cycle is complete, the Impact switches back to UVC mode to eliminate any trace ozone, faster than its natural half-life conversion back to oxygen.
Advanced Monitoring Technology and
Cloud Based Online Systems
The touchscreen control of the Impact can be used to set fan speed, UVC dose and adjusted to neutralise different types of bacteria and viruses from the air. But the Impact also contains a complex sensor array that actively monitors Air Quality (AQI) and air exchanges within the room it is placed. This information is synced wirelessly with our cloud platform so that information is always available to building managers, across multiple units and multiple sites.
The touchscreen can also be set to display this data. This is highly effective for creating peace of mind for building occupants, delivering air cleaning that can actually be seen in real-time, on each Impact unit. The data is available through our React-Air mobile app and on our online web-based app, delivering confidence that you are meeting your duty of care.
Real-Time Data on our Mobile App and Online, for Monitoring Across Multiple Sites
The React-Air monitoring system uses state-of-the-art measurement contained within the Impact device. Measurements are taken every 10 seconds to ascertain:
Lamp Function and Brightness
Over time, all UV Germicidal Lamps will lose brightness and the surfaces become contaminated by impurities in the air. Once this reaches a threshold, the in-built UV monitor alerts the user that a service is required.
The integrated air quality monitor measures air impurities down to 0.1um. Every 10 seconds, this information is recorded and sent back to the building’s base unit to show real-time air quality information.
Air Flow and Air Exchange Rates
By constantly monitoring air-flow volume through each one of the Impact units, the React-Air system calculates the number of hourly, daily, and weekly air exchanges in your building.
CALL US NOW: 0203 885 2299
How Effective Are Our React-Air Products Against Covid-19?
Since coronavirus (covid-19) is a new virus, testing products specifically against this strain is only just becoming possible. Any company claiming that their air steriliser is guaranteed to eliminate Covid-19 must be able to back this up with evidence. Studies by The University of Boston undertaken in 2020 have shown that Covid-19 is highly susceptible to UVC light. Japanese scientists have been conducting studies on the effects of ozone in neutralising Covid-19 on surfaces and have shown it to be highly effective with a 90% sterilisation rate. This information, published by research.net shows the results and effective dosages of UV-C light required to inactivate various strains of coronavirus.
“Table 1 above summarises the results of studies that have been performed on Coronaviruses under ultraviolet light exposure, with the specific species indicated in each case. The D90 value indicates the ultraviolet dose for 90% inactivation.
Although there is a wide range of variation in the D90 values, this is typical of laboratory studies on ultraviolet susceptibility. The range of D90 values for coronaviruses is 7-241 J/m2 the mean of which is 67 J/m2, should adequately represent the ultraviolet susceptibility of the SARS-CoV-2 (COVID-19) virus.”
By using this exposure data, and comparing the UV light irradiance measurements from our products, we calculate the exposure times required to deactivate coronaviruses. This is however, a calculation and currently is not backed up by laboratory tests.